发布日期：2026-04-18 浏览次数：6236
玻璃钢净化塔分段组装，具有占地面积小、运送设备便利的特点。鼓风机进出口压力改变常常留意罗茨鼓风机进山压力改变，避免机抽负压。液体的让常保持贫液槽和脱硫塔液位正常，避免泵抽暇。该产品选用的复合材料和耐高温玻璃钢树脂，进步了耐磨性和耐高温性，大大延伸了运用寿命。
烟气进入吸收塔向上活动。脱硫塔选用逆流下喷浆洗刷，气液充沛触摸，脱硫塔选用内置多层旋流板的办法，在脱硫塔旋流板顶层设有喷嘴，所喷射的氢氧化钠溶液经过矿浆层喷在旋流板中心轴配水器上，碱液均匀散布。在旋流板的分流作用下，烟气旋流器上升切割，碱液均匀散布在旋流板上。
Acid gases such as SO2, SO3, HCl and HF are fully absorbed. The desulfurization tower is sprayed to form NaSO3 and NaHSO3. Sodium hydroxide is used as the absorbent, and then sodium hydroxide alkali solution is added into the circulating pool and pumped into the absorption tower to absorb SO2 together with the sodium hydroxide solution regenerated by lime. The advanced liquid gas separator (mist eliminator) is made of liquid membrane adsorption liquid gas separation principle, which can separate small droplets from flue gas, reduce water consumption of the system and save operation cost. PLC automatic control system is selected, which is convenient to operate and reduce the amount of labor.
The above contents mentioned above are the key points that can not be ignored in the process of using desulfurization tower in brick factory. I believe everyone is very clear. The circulating operation of desulfurizing liquid is linked by pH monitor and control system to ensure that the pH value of desulfurization liquid is controlled at about 11, and the method of dosing before pump is selected.
厂内的玻璃钢冷却塔一般设备在屋面或其他承载能力足够的建筑物的地板上，因为它具有的通风作用，能更好地协助冷却塔散热。锅炉脱硫塔脱硫塔液路：脱硫塔浆液的pH值保持在正常范围内，优化了SO2的去除功率和亚硫酸铵的氧化率，硫酸铵易溶解。